- Wiping Cloths, Use Limitation
Observation: Cloths in-use for wiping counters and other equipment surfaces are not held between uses in a chemical sanitizer solution of proper concentration
Correction: and/or not laundered daily.
- RTE, TCS, Date Marking/On-Premises Preparation (corrected on site)
Observation: Containers of cooked lasagna and cooked rice in walk in, prepared and held in the food establishment for more than 24 hours is not clearly marked to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded. Corrected by instruction.
Correction: Except when packaging food using a reduced oxygen packaging method as specified under section 3-502.12, refrigerated, ready-to-eat, time/temperature control for safety food prepared and held in a food establishment for more than 24 hours shall be clearly marked to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded, based on the temperature of 5ºC (41ºF) or less for a maximum of 7 days. The day of preparation shall be counted as Day 1. A date marking system that meets the criteria of this section may include: (1) Using a method approved by the regulatory authority for refrigerated, ready-to-eat time/temperature control for safety food that is frequently rewrapped, such as lunchmeat or a roast, or for which date marking is impractical, such as soft serve mix or milk in a dispensing machine
- Equipment/Good Repair and Proper Adjustment (corrected on site)
Observation: The soda machine backsplash was cracked and in disrepair. Discarded.
Correction: Equipment shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 [Materials for Construction and Repair] and 4-2 [Design and Construction]. Proper maintenance of equipment to manufacturer specifications helps ensure that it will continue to operate as designed. Failure to properly maintain equipment could lead to violations of the associated requirements of the Code that place the health of the consumer at risk. For example, refrigeration units in disrepair may no longer be capable of properly cooling or holding potentially hazardous (time/temperature control for safety) foods at safe temperatures.
- Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils/Clean
Observation: The nonfood-contact surface of the cup dispenser is not kept free of an accumulation of dust, dirt, food residue, and/or other debris.
Correction: Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris. The objective of cleaning focuses on the need to remove soil from nonfood contact surfaces so that pathogenic microorganisms will not be allowed to accumulate and insects and rodents will not be attracted.
|
03/08/2016 | Routine | |
| No violation noted during this evaluation. | 11/13/2015 | Follow-up | |
Re-inspection to be conducted on or about 10 days to determine compliance.
- Time/Temperature Control for Safety Food, Cold Holding (corrected on site)
Observation: Grated cheese cold holding on ice at 50 F. Discarded.
Correction: Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under section 3-501.19, and except as specified under paragraph (B) of this section, time/temperature control for safety food shall be maintained at 5ºC (41ºF) or less. Bacterial growth and/or toxin production can occur if time/temperature control for safety food remains in the temperature "Danger Zone" of 5ºC to 57ºC (41ºF to 135ºF) too long. Up to a point, the rate of growth increases with an increase in temperature within this zone. Beyond the upper limit of the optimal temperature range for a particular organism, the rate of growth decreases. Operations requiring heating or cooling of food should be performed as rapidly as possible to avoid the possibility of bacterial growth.
- Time/Temperature Control for Safety Food, Cold Holding (corrected on site)
Observation: grated cheese cold holding aon ice at 50 F. Discarded.
Correction: Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under section 3-501.19, and except as specified under paragraph (B) of this section, time/temperature control for safety food shall be maintained at 5ºC (41ºF) or less. Bacterial growth and/or toxin production can occur if time/temperature control for safety food remains in the temperature "Danger Zone" of 5ºC to 57ºC (41ºF to 135ºF) too long. Up to a point, the rate of growth increases with an increase in temperature within this zone. Beyond the upper limit of the optimal temperature range for a particular organism, the rate of growth decreases. Operations requiring heating or cooling of food should be performed as rapidly as possible to avoid the possibility of bacterial growth.
- Equipment, Food-Contact Surfaces, and Utensils
Observation: The food-contact surfaces of knives on knife rack, hand canopener, and soda nozzles are not clean to sight and touch.
Correction: Equipment food-contact surfaces and utensils shall be clean to sight and touch. The objective of cleaning focuses on the need to remove organic matter from food-contact surfaces so that sanitization can occur.
- Equipment, Food-Contact Surfaces, and Utensils
Observation: The food-contact surfaces of the spice container, the knives on knife rack, canopener blade, and the soda nozzles, are not clean to sight and touch.
Correction: Equipment food-contact surfaces and utensils shall be clean to sight and touch. The objective of cleaning focuses on the need to remove organic matter from food-contact surfaces so that sanitization can occur.
- Food Manager Certificate and Responsibility
Observation: The food establishment is not under the immediate control of a Northern Virginia certified food manager.
Correction: It shall be unlawful to operate a food establishment unless it is under the immediate control of a Northern Virginia certified food manager
- Food Manager Certificate and Responsibility
Observation: The food establishment is not under the immediate control of a Northern Virginia certified food manager.
Correction: It shall be unlawful to operate a food establishment unless it is under the immediate control of a Northern Virginia certified food manager
|
11/03/2015 | Risk Factor | |
- Time Public Health Control/Time - Maximum up to 4 Hours/Marked (corrected on site)
Observation: The pan pizzas and strrombolis, for which time only, rather than time in conjunction with temperature control, is/are not properly labeled to indicate the time it/they shall be discarded.
Correction: If time only, rather than time in conjunction with temperature control, up to a maximum of 4 hours, is used as the public health control: The food shall be marked or otherwise identified to indicate the time that is 4 hours past the point in time when the food is removed from temperature control.
- Equipment and Utensils/Durability and Strength
Observation: The Cuisinart mini food processor is(are) not designed and constructed to be durable.
Correction: Equipment and utensils shall be designed and constructed to be durable and to retain their characteristic qualities under normal use conditions. Equipment and utensils must be designed and constructed to be durable and capable of retaining their original characteristics so that such items can continue to fulfill their intended purpose for the duration of their life expectancy and to maintain their easy cleanability. If they can not maintain their original characteristics, they may become difficult to clean, allowing for the harborage of pathogenic microorganisms, insects, and rodents. Equipment and utensils must be designed and constructed so that parts do not break and end up in food as foreign objects or present injury hazards to consumers. A common example of presenting an injury hazard is the tendency for tines of poorly designed single service forks to break during use.
- Equipment/Good Repair and Proper Adjustment
Observation: The shelf under prep table in kitchen was observed with accumulation of rust.
Correction: Equipment shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 [Materials for Construction and Repair] and 4-2 [Design and Construction]. Proper maintenance of equipment to manufacturer specifications helps ensure that it will continue to operate as designed. Failure to properly maintain equipment could lead to violations of the associated requirements of the Code that place the health of the consumer at risk. For example, refrigeration units in disrepair may no longer be capable of properly cooling or holding potentially hazardous (time/temperature control for safety) foods at safe temperatures.
- Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils/Clean
Observation: Encrusted grease deposits and/or other soil accumulations were observed on the food-contact surfaces of the sheet pans and cooking skillets.
Correction: The food-contact surfaces of cooking equipment and pans shall be kept free of encrusted grease deposits and other soil accumulations. The objective of cleaning focuses on the need to remove organic matter from food-contact surfaces so that sanitization can occur and to remove soil from nonfood contact surfaces so that pathogenic microorganisms will not be allowed to accumulate and insects and rodents will not be attracted.
- Handwashing Sink/Using/Operation and Maintenance (corrected on site)
Observation: The handwashing sink located at kitchen was blocked with dishes in basin.
Correction: A handwashing sink shall be maintained so that it is accessible at all times for employee use. Facilities must be maintained in a condition that promotes handwashing and restricted for that use. Convenient accessibility of a handwashing facility encourages timely handwashing which provides a break in the chain of contamination from the hands of food employees to food or food-contact surfaces.
- Handwashing Sink/Using/Operation and Maintenance (corrected on site) (repeated violation)
Observation: The handwashing station at the front counter is being used as a dump station for ice.
Correction: The handwashing facility identified above is to be used for washing hands only.
- Light Bulbs, Protective Shielding
Observation: A light shield in kitchen was cracked and in disrepair.
Correction: Light bulbs shall be shielded, coated, or otherwise shatter-resistant in areas where there is exposed food
|
03/26/2015 | Routine | |
Time as a public health control is used for salad and pizza.
- Handwashing Sink/Using/Operation and Maintenance (corrected on site) (repeated violation)
Observation: The handwashing sink by the 3 compartment sink was blocked by the trash cans. The drink syrups were observed blocking the front handsink.
Correction: A handwashing sink shall be maintained so that it is accessible at all times for employee use. Facilities must be maintained in a condition that promotes handwashing and restricted for that use. Convenient accessibility of a handwashing facility encourages timely handwashing which provides a break in the chain of contamination from the hands of food employees to food or food-contact surfaces.
|
11/07/2014 | Risk Factor | |
- Critical: Time/Temperature Control for Safety Food, Cold Holding
Observation: Cheddar cheese cold holding at the improper temperature of 45 F in the store room 2 door uprt unit. Call for service placed. .
Correction: Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under section 3-501.19, and except as specified under paragraph (B) of this section, time/temperature control for safety food shall be maintained at 5ºC (41ºF) or less. Bacterial growth and/or toxin production can occur if time/temperature control for safety food remains in the temperature "Danger Zone" of 5ºC to 57ºC (41ºF to 135ºF) too long. Up to a point, the rate of growth increases with an increase in temperature within this zone. Beyond the upper limit of the optimal temperature range for a particular organism, the rate of growth decreases. Operations requiring heating or cooling of food should be performed as rapidly as possible to avoid the possibility of bacterial growth.
- Critical: Manual and Mechanical Warewashing Equipment, Chemical Sanitization - Temperature, pH, Concentration, and Hardness (corrected on site)
Observation: The quaterenary ammonium sanitizer in the 3 part sink was observed at greater than 400 parts per million. The quaternary ammonium chemical sanitizer used in the sanitizing solution does not meet the criteria specified under section 7-204.11, is not used in accordance with the EPA-approved manufacturer's label use instructions, does not have a minimum temperature of 75ºF, have a concentration as specified under section 7-204.11 and as indicated by the manufacturer's use directions included in the labeling, or used only in water with 500 mg/L or less or in water having a hardness no greater than specified by the manufacturer's label. Corrected by dillution.
Correction: An quaternary ammonium chemical sanitizer used in a sanitizing solution for a manual or mechanical operation at exposure times specified under paragraph 4-703.11(C) shall meet the criteria specified under section 7-204.11 Sanitizers, Criteria, shall be used in accordance with the EPA-approved manufacturer's label use instructions, and shall have a: (1) Minimum temperature of 24ºC (75ºF), (2) Have a concentration as specified under section 7-204.11 and as indicated by the manufacturer's use directions included in the labeling, and (3) Be used only in water with 500 mg/L hardness or less or in water having a hardness no greater than specified by the manufacturer's label. The effectiveness of chemical sanitizers can be directly affected by the temperature, pH, concentration of the sanitizer solution used, and hardness of the water. Therefore, it is critical to sanitization that the sanitizers are used properly and the solutions meet the minimum standards required in the Code.
- Handwashing Sink/Using/Operation and Maintenance (corrected on site)
Observation: The handwashing sink located at the 3 part sink was observed with food debris in basin. Corrected by instruction.
Correction: A handwashing sink shall be maintained so that it is accessible at all times for employee use. Facilities must be maintained in a condition that promotes handwashing and restricted for that use. Convenient accessibility of a handwashing facility encourages timely handwashing which provides a break in the chain of contamination from the hands of food employees to food or food-contact surfaces.
|
06/24/2014 | Risk Factor | |
1. Post 2014 Health Permit conspicuously.
- Equipment/Good Repair and Proper Adjustment
Observation: Gaskets of walk-in refrigerator are not maintained in a state of repair and condition that meets the requirements of materials for construction and repair and/or design.
Correction: Equipment shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 [Materials for Construction and Repair] and 4-2 [Design and Construction]. Proper maintenance of equipment to manufacturer specifications helps ensure that it will continue to operate as designed. Failure to properly maintain equipment could lead to violations of the associated requirements of the Code that place the health of the consumer at risk. For example, refrigeration units in disrepair may no longer be capable of properly cooling or holding potentially hazardous (time/temperature control for safety) foods at safe temperatures.
- Refuse/Storage Areas, Rooms, and Receptacles, Capacity and Availability
Observation: There is no waste receptacle located at the hand washing sink in dry storage room.
Correction: If disposable towels are used at handwashing lavatories, a waste receptacle shall be located at each lavatory or group or adjacent lavatories. Garbage containers should be available wherever garbage is generated to aid in the proper disposal of refuse.
- Outer Openings, Protected (repeated violation)
Observation: The outer openings of the food establishment are not protected against the entry of insects and rodents. Rear exit door from kitchen is not self-closing tightly. Entrance/exit door from dry storage room is missing self-closing mechanism.
Correction: Outer openings of a food establishment shall be protected against the entry of insects and rodents by: (1) Filling or closing holes and other gaps along floors, walls, and ceilings
- Handwashing Signage (corrected on site)
Observation: A sign or poster that notifies food employees to wash their hands is not provided at kitchen handwashing sink used by food employees and/or is not clearly visible to food employees.
Correction: A sign or poster that notifies food employees to wash their hands shall be provided at all handwashing sinks used by food employees and shall be clearly visible to food employees. A sign or poster is required to remind food employees to wash their hands.
|
02/12/2014 | Routine | |
1. Wash hands frequently.
2. Avaoid bare hand contact, when scooping up ice.
3. Do not leave spoons inside the foods.
- Critical: Potentially Hazardous Food, Hot Holding (corrected on site)
Observation: Baked ziti hot holding at the improper temperature of 106F.
Correction: Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under section 3-501.19, and except as specified under paragraph (B) of this section, Potentially Hazardous Food (Time/Temperature Control for Safety Food) shall be maintained at 57ºC (135ºF) or above, except that roasts cooked to a temperature and for a time specified in paragraph 3-401.11(B) or reheated as specified in paragraph 3-403.11(E) may be held at a temperature of 54ºC (130ºF) or above. Bacterial growth and/or toxin production can occur if potentially hazardous food (time/temperature control for safety food) remains in the temperature "Danger Zone" of 5ºC to 57ºC (41ºF to 135ºF) too long. Up to a point, the rate of growth increases with an increase in temperature within this zone. Beyond the upper limit of the optimal temperature range for a particular organism, the rate of growth decreases. Operations requiring heating or cooling of food should be performed as rapidly as possible to avoid the possibility of bacterial growth.
- Critical: Potentially Hazardous Food, Cold Holding (corrected on site)
Observation: Tomatoes+Fresh mozarella cheese salad and pepperonis on ice cold holding at the improper temperature of 46F and 51F, respectively.
Correction: Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under section 3-501.19, and except as specified under paragraph (B) of this section, Potentially Hazardous Food (Time/Temperature Control for Safety Food) shall be maintained at 5ºC (41ºF) or less. Bacterial growth and/or toxin production can occur if potentially hazardous food (time/temperature control for safety food) remains in the temperature "Danger Zone" of 5ºC to 57ºC (41ºF to 135ºF) too long. Up to a point, the rate of growth increases with an increase in temperature within this zone. Beyond the upper limit of the optimal temperature range for a particular organism, the rate of growth decreases. Operations requiring heating or cooling of food should be performed as rapidly as possible to avoid the possibility of bacterial growth.
- Equipment/Nonfood-Contact Surfaces/Cleaning Frequency
Observation: The nonfood-contact surface of the "Delfield" freezer (storage room) is in need of defrosting and cleaning.
Correction: Nonfood-contact surfaces of equipment shall be cleaned at a frequency necessary to preclude accumulation of soil residues. The presence of food debris or dirt on nonfood contact surfaces may provide a suitable environment for the growth of microorganisms which employees may inadvertently transfer to food. If these areas are not kept clean, they may also provide harborage for insects, rodents, and other pests.
- Handwashing Sink/Using/Operation and Maintenance (corrected on site)
Observation: Both front- and back handwashing sinks were blocked by serving- and pizza dough-trays, respectively and are not maintained so that it is accessible at all times for employee use.
Correction: A handwashing sink shall be maintained so that it is accessible at all times for employee use. Facilities must be maintained in a condition that promotes handwashing and restricted for that use. Convenient accessibility of a handwashing facility encourages timely handwashing which provides a break in the chain of contamination from the hands of food employees to food or food-contact surfaces.
- Outer Openings, Protected
Observation: The outer openings of the food establishment are not protected against the entry of insects and rodents. Back exit door is not self-closing.
Correction: Outer openings of a food establishment shall be protected against the entry of insects and rodents by: (1) Filling or closing holes and other gaps along floors, walls, and ceilings
- Controlling Pests
Observation: Insect, rodent, and/or other pest harborage conditions exist on the premises. Some roaches observed trapped on glue trap.
Correction: The presence of insects, rodents, and other pests shall be controlled to minimize their presence on the premises by eliminating harborage conditions. Insects and other pests are capable of transmitting disease to man by contaminating food and food-contact surfaces. Effective measures must be taken to control their presence in food establishments.
|
05/07/2013 | Routine | |
Restaurant representatives - add corrected or new information about Villa Pizza, 1100 S Hayes St M-100, Arlington, VA 22202 »