- Food Contact Surfaces - Cleanability*
Observation: The food contact surface of the towel is not designed or constructed to be smooth and it contains cracks, chips, or pits that can not be easily cleaned. Towel in the bottom of reach in cooler is directly in contact with hotdogs.
Correction: Replace the towel to provide a food contact surface that is smooth and easily cleanable, free of breaks, open seams, cracks, chips, pits, sharp internal angles, corners, and crevices to prevent build-up of food debris.
- Temperature - Food Temperature Measuring Devices - Provided (repeated violation)
Observation: The person in charge could not provide a food temperature measuring device.
Correction: Obtain at least one food temperature measuring device so employees can properly monitor the temperature of food items in the establishment.
- Sanitizing Solutions, Testing Devices
Observation: There is no properly working test kit provided in the facility for monitoring the concentration of the chemical sanitizing solutions.
Correction: Obtain a test kit so that employees can accurately monitor the concentration of the sanitizing solutions and maintain them at a safe and effective level.
|
05/27/2015 | Routine | |
- Nonfood-Contact Surfaces - Corrosion Resistant/Nonabsorbent (repeated violation)
Observation: The nonfood contact surface of the refrigerator (Silver King) is not corrosion resistant, nonabsorbent, and/or smooth. Pitted rust on interior of refrigerator
Correction: Nonfood contact equipment that is exposed to splash, spillage, food soiling, or requires frequent cleaning must be smooth, durable, and nonabsorbent.
|
07/22/2013 | Follow-up | |
- Critical: Demonstration of Knowledge* (corrected on site)
Observation: The person in charge failed to describe the symptoms associated with diseases that are transmissible through food.
Correction: Ensure the designated person in charge (PIC) is knowledgeable about foodborne disease prevention, Hazardous Analysis Critical Control Point principles and Regulation requirements. The PIC should be prepared to recognize conditions that may contribute to foodborne illness. The PIC must also recognize conditions that fail to comply with Regulation requirements and be authorized to take the appropriate preventive and corrective actions to ensure that the Regulations' objectives are fulfilled.
- Critical: Employee Health* (corrected on site)
Observation: Employees or applicants are not aware of the reporting procedures concerning information about their health and activities as they relate to diseases that are transmissible through food, including the date of onset of jaundice or of an illness due to Salmonella Typhi, Shigella spp., Escherichia coli O157:H7, Hepatitis A virus or Norovirus
Correction: Have the license holder require employees or applicants report to the person in charge any information about their health and activities if they are diagnosed with or had a past illness from Salmonella Typhi, Shigella spp., Escherichia coli O157:H7, Hepatitis A virus or Norovirus
- Critical: Food - Potentially Hazardous Food - Cold Holding* (corrected on site)
Observation: Chicken salad (44F), Tuna salad (47F), Ham sandwhich (47F), turkey sandwhich (47F) cold holding at improper temperatures
Correction: Relocate food to a refrigeration unit that is capable of maintaining food storage at 41°F or below.
- Nonfood-Contact Surfaces - Corrosion Resistant/Nonabsorbent
Observation: The nonfood contact surface of the refrigerator (Silver King) is not corrosion resistant, nonabsorbent, and/or smooth. Pitted rust on interior of refrigerator
Correction: Nonfood contact equipment that is exposed to splash, spillage, food soiling, or requires frequent cleaning must be smooth, durable, and nonabsorbent.
- Temperature Measuring Devices
Observation: There was no temperature measuring device located in the refrigerator, Silver King.
Correction: Provide a temperature measuring device in all hot or cold holding equipment used to store potentially hazardous foods so that employees can routinely monitor the ambient air temperature.
- Temperature - Food Temperature Measuring Devices - Provided
Observation: The person in charge could not provide a food temperature measuring device.
Correction: Obtain at least one food temperature measuring device so employees can properly monitor the temperature of food items in the establishment.
- Equipment - Good Repair and Proper Adjustment
Observation: Refrigerator, Delfield, (55F) was observed in a state of disrepair and damaged.
Correction: Repair the refrigerator to restore a state of condition that allows for proper operation, accuracy, functioning, maintenance, and cleanability per Part IV, Article 1 and 2 of this chapter. If unable to repair, replace it with one that meets the specifications of Part IV, Article 1 and 2 of this chapter.
- Equipment - Cutting Surfaces
Observation: The cutting board is heavily scratched and scored. The food contact surface is no longer easily cleaned and sanitized due to condition.
Correction: Resurface or discard and replace the cutting boards to provide a food contact surface that is smooth, easily cleaned and sanitized.
- Critical: Equipment and Utensils - Before Use After Cleaning*
Observation: The food-contact surfaces of the following equipment were not observed sanitized: cutting board and utensils.
Correction: After cleaning and rinsing of the food-contact surface, the surface shall be effectively sanitized before coming in contact with food and before use.
- Handwashing Signage/Handwashing Facilities
Observation: A sign or poster that notifies food employees to wash their hands is not provided at all lavatories used by food employees, male restroom.
Correction: Provide a sign or poster that notifies food employees to wash their hands at all handwashing lavatories used by food employees.
|
06/11/2013 | Routine | |
Restaurant representatives - add corrected or new information about Kingsmill Resort Woods Sandwich Shop, 1010 Kingsmill Road, Williamsburg, VA 23185 »