- Cooling, Cooked Food (corrected on site)
Observation: Clam soup cooked yesterday (10/27) was not cooled within 2 hours from 57ºC (135ºF) to 21ºC (70ºF)
Correction: and/or within a total of 6 hours from 57ºC (135ºF) to 5ºC (41ºF) or less. Soup was discarded.
- Cooling Methods (corrected on site)
Observation: Methods used for cooling soup can not be accomplished with the time and temperature criteria.
Correction: Cooling shall be accomplished in accordance with the time and temperature criteria specified under section 3-501.14 by using one or more of the following methods based on the type of food being cooled: (1) Placing food in shallow pans
- Food-Contact Surfaces/Cleanability
Observation: The food-contact surfaces of the small teflon coated frying pans and the metal baking pans are not smooth, free of breaks, open seams, cracks, chips, inclusions, pits or similar imperfections making them no longer smooth, easily cleanable.
Correction: Multiuse food-contact surfaces shall be: (1) Smooth
- Equipment/Good Repair and Proper Adjustment
Observation: The following equipment is not maintained in a state of repair and condition that meets the requirements of materials for construction and repair and/or design:
1. small home standard refrigerator in the employee cafeteria not maintaining ambient air temperature of 41 F or below
2. bottom metal piece on refrigerator #5 is damaged
3. microwave rusting inside.
Correction: Equipment shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 [Materials for Construction and Repair] and 4-2 [Design and Construction]. Proper maintenance of equipment to manufacturer specifications helps ensure that it will continue to operate as designed. Failure to properly maintain equipment could lead to violations of the associated requirements of the Code that place the health of the consumer at risk. For example, refrigeration units in disrepair may no longer be capable of properly cooling or holding potentially hazardous (time/temperature control for safety) foods at safe temperatures.
- Cutting Surfaces
Observation: The surfaces of the cutting boards on the prep refrigerator #8 and on cookline are no longer effectively cleaned and sanitized.
Correction: Surfaces such as cutting blocks and boards that are subject to scratching and scoring shall be resurfaced if they can no longer be effectively cleaned and sanitized, or discarded if they are not capable of being resurfaced. Cutting surfaces such as cutting boards and blocks that become scratched and scored may be difficult to clean and sanitize. As a result, pathogenic microorganisms transmissible through food may build up or accumulate. These microorganisms may be transferred to foods that are prepared on such surfaces.
- Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils/Clean
Observation: The nonfood-contact surfaces of the storage shelving and walk-in cooler shelving (dairy) are not kept free of an accumulation of dust, dirt, food residue, and/or other debris.
Correction: Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris. The objective of cleaning focuses on the need to remove soil from nonfood contact surfaces so that pathogenic microorganisms will not be allowed to accumulate and insects and rodents will not be attracted.
- Equipment, Utensils, Linens, and Single-Service and Single-Use Articles/Storing
Observation: Observed cleaned equipment and utensils improperly stored on soiled racks and shelving.
Correction: Cleaned equipment and utensils, laundered linens, and single-service and single-use articles shall be stored: (1) In a clean, dry location
- Intensity/Lighting
Observation: The light intensity is below 50 foot candles where a food employee is working with food (produce prep area/sink).
Correction: The light intensity shall be at least 540 lux (50 foot candles) at a surface where a food employee is working with food or working with utensils or equipment such as knives, slicers, grinders, or saws where employee safety is a factor. Lighting levels are specified so that sufficient light is available to enable employees to perform certain functions such as reading labels
- Intensity/Lighting
Observation: The light intensity is below 20 foot candles inside the 4 door glass refrigerator #4.
Correction: The light intensity shall be at least 215 lux (20 foot candles): (1) At a surface where food is provided for consumer self-service such as buffets and salad bars or where fresh produce or packaged foods are sold or offered for consumption, (2) Inside equipment such as reach-in and under-counter refrigerators
- Intensity/Lighting
Correction:
- Physical Facilities/Repairing (repeated violation)
Observation: Observed the door framing at the doorway to the dry storage area is not maintained in good repair. Observed some areas with damage to walls.
Correction: Physical facilities shall be maintained in good repair. Poor repair and maintenance compromises the functionality of the physical facilities. This requirement is intended to ensure that the physical facilities are properly maintained in order serve their intended purpose.
- Cleaning, Frequency and Restrictions
Observation: The floors and walls under and behind equipment are not cleaned as often as necessary to keep them clean. The walls and floors in the walk-in coolers are in need of cleaning.
Correction: Physical facilities shall be cleaned as often as necessary to keep them clean. Cleaning of the physical facilities is an important measure in ensuring the protection and sanitary preparation of food. A regular cleaning schedule should be established and followed to maintain the facility in a clean and sanitary manner.
|
10/28/2015 | Routine | |
- Wiping Cloths, Use Limitation (repeated violation)
Observation: Cloths in-use for wiping counters and other equipment surfaces are not all held between uses in a chemical sanitizer solution of proper concentration (observed on counter).
Correction: Cloths in-use for wiping counters and other equipment surfaces shall be: (1) Held between uses in a chemical sanitizer solution at a concentration specified under section 4-501.114
- Critical: Time/Temperature Control for Safety Food, Cold Holding (corrected on site)
Observation: Milk at the executive lounge coffee station pitcher cold holding at the improper temperature of 46 F. Chicken topping (relish with cut melons) at the improper temperature of 54 F on the prep line counter. The facility was instructed to switch out the milk pitchers more frequently and to surround the pan of relish with ice.
Correction: Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under section 3-501.19, and except as specified under paragraph (B) of this section, time/temperature control for safety food shall be maintained at 5ºC (41ºF) or less. Bacterial growth and/or toxin production can occur if time/temperature control for safety food remains in the temperature "Danger Zone" of 5ºC to 57ºC (41ºF to 135ºF) too long. Up to a point, the rate of growth increases with an increase in temperature within this zone. Beyond the upper limit of the optimal temperature range for a particular organism, the rate of growth decreases. Operations requiring heating or cooling of food should be performed as rapidly as possible to avoid the possibility of bacterial growth.
- Equipment, Food-Contact Surfaces, and Utensils
Observation: Several cutting boards are not clean to sight and touch.
Correction: Equipment food-contact surfaces and utensils shall be clean to sight and touch. The objective of cleaning focuses on the need to remove organic matter from food-contact surfaces so that sanitization can occur.
- Equipment/Nonfood-Contact Surfaces/Cleaning Frequency
Observation: The cook-line counter shelves are not cleaned at a frequency necessary to preclude the accumulation of soil residues.
Correction: Nonfood-contact surfaces of equipment shall be cleaned at a frequency necessary to preclude accumulation of soil residues. The presence of food debris or dirt on nonfood contact surfaces may provide a suitable environment for the growth of microorganisms which employees may inadvertently transfer to food. If these areas are not kept clean, they may also provide harborage for insects, rodents, and other pests.
- Critical: Equipment/Food-Contact/Before Use After Cleaning/Sanitized (corrected on site)
Observation: Utensils and food-contact surfaces of equipment were not sanitized after cleaning. The kitchen dishmachine is not turning a 160 F thermolabel black. The facility was instructed to sanitize all food-contact surfaces in the three compartment sink until the dishmachine can turn the thermolabel black.
Correction: Utensils and food-contact surfaces of equipment shall be sanitized before use after cleaning. Sanitization is accomplished after the warewashing steps of cleaning and rinsing so that utensils and food-contact surfaces are sanitized before coming in contact with food and before use.
- Equipment and Utensils, Air-Drying Required
Observation: Cutting boards observed stacked while still wet.
Correction: After cleaning and sanitizing, equipment and utensils: (A) Shall be air-dried or used after adequate draining as specified in the first paragraph of 40 CFR 180.940 Tolerance exemptions for active and inert ingredients for use in antimicrobial formulations (food-contact surface sanitizing solutions), before contact with food
- Refuse/Covering Receptacles
Observation: Receptacles and/or waste handling units for refuse, recyclables, and/or returnables kept outside the food establishment are not kept covered with tight-fitting lids or doors.
Correction: Receptacles and waste handling units for refuse, recyclables, and returnables shall be kept covered with tight-fitting lids or doors if kept outside the food establishment. Outside receptacles must be constructed with tight-fitting lids or covers to prevent the scattering of the garbage or refuse by birds, the breeding of flies, or then entry of rodents.
- Outer Openings, Protected
Observation: The outer openings of the food establishment are not protected against the entry of insects and rodents. An air gap was observed under the loading dock door.
Correction: Outer openings of a food establishment shall be protected against the entry of insects and rodents by: (1) Filling or closing holes and other gaps along floors, walls, and ceilings
- Hand Drying Provision
Observation: Each handwashing sink is not provided with individual, disposable towels
Correction: a continuous towel system that supplies the user with a clean towel
- Physical Facilities/Repairing
Observation: There are some water stained/damaged ceiling tiles in the Relish buffet area and in the kitchen area leading into the executive lounge. There are a couple of missing electrical covers missing in the kitchen area leading into the executive lounge.
Correction: Physical facilities shall be maintained in good repair. Poor repair and maintenance compromises the functionality of the physical facilities. This requirement is intended to ensure that the physical facilities are properly maintained in order serve their intended purpose.
- Controlling Pests
Observation: Some fruit flies were observed on the premises.
Correction: The presence of insects, rodents, and other pests shall be controlled to minimize their presence on the premises by eliminating harborage conditions. Insects and other pests are capable of transmitting disease to man by contaminating food and food-contact surfaces. Effective measures must be taken to control their presence in food establishments.
- Permit to Operate/Responsibilities of Permit Holder
Observation: The permit is not posted in a location in the food establishment that is conspicuous to consumers.
Correction: Upon acceptance of the permit issued by the regulatory authority, the permit holder in order to retain the permit shall post the permit in a location in the food establishment that is conspicuous to consumers.
- Critical: Food Manager Certificate and Responsibility (corrected on site)
Observation: The food establishment was not under the immediate control of a Northern Virginia certified food manager when I arrived. Oscar Cruz NVCFM F-105717 card expired 4/20/14. Ms Shrestha arrived during my inspection.
Correction: It shall be unlawful to operate a food establishment unless it is under the immediate control of a Northern Virginia certified food manager
|
04/30/2014 | Routine | |
- Demonstration/Knowledge/Responding Correctly to the Inspector's Questions (corrected on site)
Observation: The person in charge did not demonstrate their knowledge of the required food temperatures and times for the safe cooking of potentially hazardous food (time/temperature control for safety food) including meat, poultry, eggs, and fish. Corrected by instruction.
Correction: Based on the risks inherent to the food operation, during inspections and upon request the person in charge shall demonstrate to the regulatory authority knowledge of foodborne disease prevention, application of the hazard analysis and critical control point principles, and the requirements of this Code. The person in charge shall demonstrate this knowledge by responding correctly to the inspector's questions as they relate to the specific food operation. The areas of knowledge include stating the required food temperatures and times for the safe cooking of potentially hazardous food (time/temperature control for safety food) including meat, poultry, eggs, and fish.
- RTE, PHF(TCS), Date Marking/Commercially Processed Food (corrected on site)
Observation: Deli meats and cheese prepared and packaged by a food processing plant opened and held for more than 24 hours were not clearly marked at the time the original container was opened in the food establishment to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded. Corrected by instruction.
Correction: Refrigerated, ready-to-eat, potentially hazardous food (time/temperature control for safety food) prepared and packaged by a food processing plant shall be clearly marked, at the time the original container is opened in a food establishment and if the food is held for more than 24 hours, to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded, based on the temperature and time combination specified in paragraph (A) of this section and: (1) The day the original container is opened in the food establishment shall be counted as Day 1
- Handwashing Signage (corrected on site) (repeated violation)
Observation: A sign or poster that notifies food employees to wash their hands is not provided at all handwashing lavatories (employee cafe) used by food employees and/or is not clearly visible to food employees. Manager was given handwashing signs to post.
Correction: A sign or poster that notifies food employees to wash their hands shall be provided at all handwashing sinks used by food employees and shall be clearly visible to food employees. A sign or poster is required to remind food employees to wash their hands.
|
12/31/2013 | Risk Factor | |
1. Seal handwashing to the adjoining wall in employee cafteria.
2. Clean dusty ceiling tiles in employee cafteria and shelves in kitchen.
3. Repair/discard counter-top (Coca Cola) refrigerator in employee cafteria.
4. Do not use high-temp warewashing machine until repaired. Setup 3-compartment sink.
- In-Use Utensils, Between-Use Storage (corrected on site)
Observation: Ice cream scoop was improperly stored in standing water at room temperature.
Correction: During pauses in food preparation or dispensing, food preparation and dispensing utensils shall be stored: (A) In the food with their handles above the top of the food and the container
- Wiping Cloths, Use Limitation (corrected on site)
Observation: Cloths in-use for wiping counters and other equipment surfaces are not held between uses in a chemical sanitizer solution of proper concentration
Correction: and/or not laundered daily.
- Food Display/Preventing Contamination by Consumers
Observation: Food on display in employee cafeteria is not protected from contamination. The sneeze guard on cold salad bar is inadequate.
Correction: Except for nuts in the shell and whole, raw fruits and vegetables that are intended for hulling, peeling, or washing by the consumer before consumption, food on display shall be protected from contamination by the use of packaging
- Critical: Potentially Hazardous Food, Cold Holding (corrected on site) (repeated violation)
Observation: Butter balls (46F), Sausage (47F) and Half-n-half (62F) were observed at improper cold holding temperature.
Correction: Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under section 3-501.19, and except as specified under paragraph (B) of this section, Potentially Hazardous Food (Time/Temperature Control for Safety Food) shall be maintained at 5ºC (41ºF) or less. Bacterial growth and/or toxin production can occur if potentially hazardous food (time/temperature control for safety food) remains in the temperature "Danger Zone" of 5ºC to 57ºC (41ºF to 135ºF) too long. Up to a point, the rate of growth increases with an increase in temperature within this zone. Beyond the upper limit of the optimal temperature range for a particular organism, the rate of growth decreases. Operations requiring heating or cooling of food should be performed as rapidly as possible to avoid the possibility of bacterial growth.
- Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils/Clean
Observation: Encrusted grease deposits and/or other soil accumulations were observed on the food-contact surfaces of the cooking pans.
Correction: The food-contact surfaces of cooking equipment and pans shall be kept free of encrusted grease deposits and other soil accumulations. The objective of cleaning focuses on the need to remove organic matter from food-contact surfaces so that sanitization can occur and to remove soil from nonfood contact surfaces so that pathogenic microorganisms will not be allowed to accumulate and insects and rodents will not be attracted.
- Equipment Food-Contact Surfaces and Utensils/Not Potentially Hazardous/Cleaning Frequency (corrected on site)
Observation: Surfaces of the fountain soda nozzles in employee cafteria are not clean.
Correction: Except when dry cleaning methods are used as specified under section 4-603.11, surfaces of utensils and equipment contacting food that is not potentially hazardous (time/temperature control for safety food) shall be cleaned: (1) At any time when contamination may have occurred
- Critical: Sanitized/Hot Water and Chemical/Methods
Observation: After being cleaned, equipment food-contact surfaces and utensils are not sanitized in the hot water mechanical operations by being cycled through equipment that is properly set up and/or achieving a utensil surface temperature of 160°F as measured by an irreversible registering temperature indicator.
Correction: After being cleaned, equipment food-contact surfaces and utensils shall be sanitized in hot water mechanical operations by being cycled through equipment that is set up as specified under sections 4-501.15, 4-501.112, and 4-501.113 and achieving a utensil surface temperature of 71°C (160°F) as measured by an irreversible registering temperature indicator. When surface temperatures of utensils passing through warewashing machines using hot water for sanitizing do not reach the required 71°C (160°F), it is important to understand the factors affecting the decreased surface temperature. A comparison should be made between the machine manufacturer's operating instructions and the machine's actual wash and rinse temperatures and final rinse pressure. The actual temperatures and rinse pressure should be consistent with the machine manufacturer's operating instructions and within limits specified in sections 4-501.112 and 4-501.113. If either the temperature of pressure of the final rinse spray is higher than the specified upper limit, spray droplets may disperse and begin to vaporize resulting in less heat delivery to utensil surfaces. Temperatures below the specified limit will not convey the needed heat to surfaces. Pressures below the specified limit will result in incomplete coverage of the heat-conveying sanitizing rinse across utensil surfaces.
- Handwashing Sink/Using/Operation and Maintenance (repeated violation)
Observation: The handwashing sink located at coffee station by ice cream freezer is being used as a dump station.
Correction: The handwashing facility identified above is to be used for washing hands only.
|
03/08/2013 | Routine | |
Restaurant representatives - add corrected or new information about Hilton Crystal City-Relish, Executive Lounge, & Employee Cafeteria, 2399 Jefferson Davis Hwy, Arlington, VA 22202 »