Establish a written time control policy for any items on the salad bar that cannot be kept at 41 degrees Fahrenheit or below (ex. for the cut melons). A written example for Time As A Public Health Control was left with the person in charge.
- In-Use Utensils, Between-Use Storage (corrected on site)
Observation: Food dispensing utensils observed stored in standing water at room temperature.
Correction: During pauses in food preparation or dispensing, food preparation and dispensing utensils shall be stored: (A) In the food with their handles above the top of the food and the container
- Critical: Cooling, Cooked Food (corrected on site)
Observation: Pan of rice cooked yesterday observed at improper temperature (65 degrees Fahrenheit). Product was discarded by the person in charge.
Correction: Cooked time/temperature control for safety food shall be cooled: (1) Within 2 hours from 57ºC (135ºF) to 21ºC (70ºF)
- Cooling Methods, Food containers (corrected on site)
Observation: Food container of gravy and cooked pasta observed not arranged to provide maximum heat transfer and/or loosely covered, or uncovered while cooling.
Correction: When placed in cooling or cold holding equipment, food containers in which food is being cooled shall be: (1) Arranged in equipment to provide maximum heat transfer through the container walls
- Critical: Time/Temperature Control for Safety Food, Cold Holding (corrected on site)
Observation: Cut melons on the salad bar observed cold holding at improper temperature (44 - 50 degrees Fahrenheit). According to the manager the product was prepared at 7:00 am and will be discarded by 11:00 am.
Correction: Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under section 3-501.19, and except as specified under paragraph (B) of this section, time/temperature control for safety food shall be maintained at 5ºC (41ºF) or less. Bacterial growth and/or toxin production can occur if time/temperature control for safety food remains in the temperature "Danger Zone" of 5ºC to 57ºC (41ºF to 135ºF) too long. Up to a point, the rate of growth increases with an increase in temperature within this zone. Beyond the upper limit of the optimal temperature range for a particular organism, the rate of growth decreases. Operations requiring heating or cooling of food should be performed as rapidly as possible to avoid the possibility of bacterial growth.
- Equipment/Cooking and Baking/Cleaning Frequency
Observation: Interior of oven cavity observed in need of cleaning.
Correction: The cavities and door seals of microwave ovens shall be cleaned at least every 24 hours by using the manufacturer's recommended cleaning procedure. Food-contact surfaces of cooking equipment must be cleaned to prevent encrustations that may impede heat transfer necessary to adequately cook food. Encrusted equipment may also serve as an insect attractant when not in use. Because of the nature of the equipment, it may not be necessary to clean cooking equipment as frequently as the equipment specified in section 4-602.11.
- Equipment/Nonfood-Contact Surfaces/Cleaning Frequency
Observation: Interior of the fryer unit cabinet observed in need of cleaning.
Correction: Nonfood-contact surfaces of equipment shall be cleaned at a frequency necessary to preclude accumulation of soil residues. The presence of food debris or dirt on nonfood contact surfaces may provide a suitable environment for the growth of microorganisms which employees may inadvertently transfer to food. If these areas are not kept clean, they may also provide harborage for insects, rodents, and other pests.
- Cleaning, Frequency and Restrictions (repeated violation)
Observation: Some ceiling tiles observed in need of cleaning and/or replacing. Floor behind the cook-line equipment in need of cleaning.
Correction: Physical facilities shall be cleaned as often as necessary to keep them clean. Cleaning of the physical facilities is an important measure in ensuring the protection and sanitary preparation of food. A regular cleaning schedule should be established and followed to maintain the facility in a clean and sanitary manner.
|
05/30/2014 | Routine | |
1. Wash hands frequently.
2. Ice scoop observed hanging on dirty wall.
3. Do not cover foods when cooling.
4. Make sure to date mark sliced cheeses and deli meats and also the remaining portions.
- Critical: Potentially Hazardous Food, Hot Holding (corrected on site)
Observation: Veggie omlette hot holding at the improper temperature of 103-116F on breakfast buffet steamtable.
Correction: (discarded) - Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under section 3-501.19, and except as specified under paragraph (B) of this section, Potentially Hazardous Food (Time/Temperature Control for Safety Food) shall be maintained at 57ºC (135ºF) or above, except that roasts cooked to a temperature and for a time specified in paragraph 3-401.11(B) or reheated as specified in paragraph 3-403.11(E) may be held at a temperature of 54ºC (130ºF) or above. Bacterial growth and/or toxin production can occur if potentially hazardous food (time/temperature control for safety food) remains in the temperature "Danger Zone" of 5ºC to 57ºC (41ºF to 135ºF) too long. Up to a point, the rate of growth increases with an increase in temperature within this zone. Beyond the upper limit of the optimal temperature range for a particular organism, the rate of growth decreases. Operations requiring heating or cooling of food should be performed as rapidly as possible to avoid the possibility of bacterial growth.
- Critical: Potentially Hazardous Food, Cold Holding (repeated violation)
Observation: The following foods were observed at improper cold holding temperature:
1. Cut melons (51-57F) - The CFM said that they use 4 hours TPHC but no written procedures or records were available.
2. Sliced ham (46F) and Sliced cheese (46F) in sandwich 2-door prep refrigerator - (foods were relocated).
Correction: Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under section 3-501.19, and except as specified under paragraph (B) of this section, Potentially Hazardous Food (Time/Temperature Control for Safety Food) shall be maintained at 5ºC (41ºF) or less. Bacterial growth and/or toxin production can occur if potentially hazardous food (time/temperature control for safety food) remains in the temperature "Danger Zone" of 5ºC to 57ºC (41ºF to 135ºF) too long. Up to a point, the rate of growth increases with an increase in temperature within this zone. Beyond the upper limit of the optimal temperature range for a particular organism, the rate of growth decreases. Operations requiring heating or cooling of food should be performed as rapidly as possible to avoid the possibility of bacterial growth.
- Nonfood-Contact Surfaces/Nonabsorbent (repeated violation)
Observation: The nonfood-contact surface of the rusty shelves in walk-in refrigerator and warewashing area is not corrosion-resistant, nonabsorbent, and/or smooth.
Correction: Nonfood-contact surfaces of equipment that are exposed to splash, spillage, or other food soiling or that requires frequent cleaning shall be constructed of a corrosion-resistant, nonabsorbent, and smooth material. Nonfood-contact surfaces of equipment routinely exposed to splash or food debris are required to be constructed of nonabsorbent materials to facilitate cleaning. Equipment that is easily cleaned minimizes the presence of pathogenic organisms, moisture, and debris and deters the attraction of rodents and insects.
- Equipment/Good Repair and Proper Adjustment (repeated violation)
Observation: The following equipment are not maintained in a state of repair and condition that meets the requirements of materials for construction and repair and/or design:
1. Sandwich 2-door prep refrigerator, observed at 46F.
2. Lid of ice machine.
3. Paper towel dispenser by 3-compartment sink.
Correction: Equipment shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 [Materials for Construction and Repair] and 4-2 [Design and Construction]. Proper maintenance of equipment to manufacturer specifications helps ensure that it will continue to operate as designed. Failure to properly maintain equipment could lead to violations of the associated requirements of the Code that place the health of the consumer at risk. For example, refrigeration units in disrepair may no longer be capable of properly cooling or holding potentially hazardous (time/temperature control for safety) foods at safe temperatures.
- Equipment/Nonfood-Contact Surfaces/Cleaning Frequency
Observation: The nonfood-contact surface of the kitchen shelves and work tables is not cleaned at a frequency necessary to preclude the accumulation of soil residues.
Correction: Nonfood-contact surfaces of equipment shall be cleaned at a frequency necessary to preclude accumulation of soil residues. The presence of food debris or dirt on nonfood contact surfaces may provide a suitable environment for the growth of microorganisms which employees may inadvertently transfer to food. If these areas are not kept clean, they may also provide harborage for insects, rodents, and other pests.
- Cleaning, Frequency and Restrictions
Observation: 1. Ceiling tiles and hanging panels in front sandwich prep area are dusty and in need of cleaning.
2. Floors and walls under and behind equipment on cookline in back kitchen are in need of cleaning.
Correction: Physical facilities shall be cleaned as often as necessary to keep them clean. Cleaning of the physical facilities is an important measure in ensuring the protection and sanitary preparation of food. A regular cleaning schedule should be established and followed to maintain the facility in a clean and sanitary manner.
|
05/22/2013 | Routine | |
Restaurant representatives - add corrected or new information about Ballston Cafe, 4601 N Fairfax Dr, Arlington, VA 22203 »