| No violation noted during this evaluation. | 08/17/2015 | VCR |
- The physical facilities shall be cleaned as often as necessary to keep them clean; Cleaning shall be done during periods when the least amount of food is exposed such as after closing. This requirement does not apply to cleaning that is necessary due to a spill or other accident.
- Hand Drying Provision - Each handwashing lavatory or group of adjacent lavatories shall be provided with Individual, disposable towels; a continuous towel system that supplies the user with a clean towel; or a heated-air hand drying device. (corrected on site)
|
06/10/2015 | Routine |
| No violation noted during this evaluation. | 06/26/2014 | Follow-Up |
- Critical: PHF, Cold Holding - Potentially hazardous cold food shall be maintained at temperatures in accordance with the Food Code.
- Temperature Measuring Devices - (A) In a mechanically refrigerated or hot food storage unit, the sensor of a temperature measuring device shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot food storage unit. (B) Except as specified in (C) of this section, cold or hot holding equipment used for potentially hazardous food shall be designed to include and shall be equipped with at least one integral or permanently affixed temperature measuring device that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to equipment for which the placement of a temperature measuring device is not a practical means for measuring the ambient air surrounding the food because of the design, type, and use of the equipment, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated food transport containers, and salad bars. (D) Temperature measuring devices shall be designed to be easily readable. (E) Food temperature measuring device and water temperature measuring device on warewashing machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1C or 2F in the intended range of use.
|
06/20/2014 | VCR |
- Critical: PHF, Cold Holding - Potentially hazardous cold food shall be maintained at temperatures in accordance with the Food Code.
- Temperature Measuring Devices - (A) In a mechanically refrigerated or hot food storage unit, the sensor of a temperature measuring device shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot food storage unit. (B) Except as specified in (C) of this section, cold or hot holding equipment used for potentially hazardous food shall be designed to include and shall be equipped with at least one integral or permanently affixed temperature measuring device that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to equipment for which the placement of a temperature measuring device is not a practical means for measuring the ambient air surrounding the food because of the design, type, and use of the equipment, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated food transport containers, and salad bars. (D) Temperature measuring devices shall be designed to be easily readable. (E) Food temperature measuring device and water temperature measuring device on warewashing machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1C or 2F in the intended range of use.
|
06/05/2014 | Routine |
| No violation noted during this evaluation. | 06/05/2014 | VCR |
- Critical: PHF, Cold Holding - Potentially hazardous cold food shall be maintained at temperatures in accordance with the Food Code.
- Temperature Measuring Devices - (A) In a mechanically refrigerated or hot food storage unit, the sensor of a temperature measuring device shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot food storage unit. (B) Except as specified in (C) of this section, cold or hot holding equipment used for potentially hazardous food shall be designed to include and shall be equipped with at least one integral or permanently affixed temperature measuring device that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to equipment for which the placement of a temperature measuring device is not a practical means for measuring the ambient air surrounding the food because of the design, type, and use of the equipment, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated food transport containers, and salad bars. (D) Temperature measuring devices shall be designed to be easily readable. (E) Food temperature measuring device and water temperature measuring device on warewashing machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1C or 2F in the intended range of use.
|
06/05/2014 | Routine |
- Critical: Backflow Prevention Device, Carbonator - If not provided with an air gap as specified under 5-203.13, a double check valve with an intermediate vent preceded by a screen of not less than 100 mesh to 25.4mm (100 mesh to 1 inch) shall be installed upstream from a carbonating device and downstream from any copper in the water supply line.
- Floors, Walls, and Ceilings - Except as specified under 6-201.14, the floors, floor coverings, walls, wall coverings, and ceilings shall be designed, constructed, and installed so they are smooth and easily cleanable, except that antislip floor coverings or applications may be used for safety reasons.
- Sanitizing Solutions, Testing Devices - A test kit or other device that accurately measures the concentration in mg/L of sanitizing solutions shall be provided.
- Hand Drying Provision - Each handwashing lavatory or group of adjacent lavatories shall be provided with Individual, disposable towels; a continuous towel system that supplies the user with a clean towel; or a heated-air hand drying device.
- Critical: Backflow Prevention, Air Gap - An air gap between the water supply inlet and the flood level rim of the plumbing fixture, equipment, or nonfood equipment shall be at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch).
- Handwashing Facility, Installation - (A) A handwashing lavatory shall be equipped to provide water at a temperature of at least 38C (100F) through a mixing valve or combination faucet. (B) A steam mixing valve may not be used at a handwashing lavatory. (C) A self-closing, slow-closing, or metering faucet shall provide a flow of water for at least 15 seconds without the need to reactivate the faucet. (D) An automatic handwashing facility shall be installed in accordance with manufacturer's instructions.
- Critical: Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils - Equipment food-contact surfaces and utensils chall be clean to sight and touch.
|
03/27/2014 | Pre-Opening |
Restaurant representatives - add corrected or new information about Hometown Sports Bar And Grill, 213 5th Ave S, Twin Falls, ID 83301 »