Marriott Crystal City Bell 20 (Mezzanine) And Buffet (Lobby), Banquet Kitchen And Corridor (Mezzanine), Concierge Lounge (4th Floor), VA coffee shop (lobby) - 1999 Jefferson Davis Hwy inspection findings and violations



Business Info

Restaurant: Marriott Crystal City Bell 20 (mezzanine) and buffet (lobby)
Address: Banquet Kitchen And Corridor (Mezzanine), Concierge Lounge (4th Floor), VA coffee shop (lobby)
Type: 1999 Jefferson Davis Hwy
Total inspections: 11
Last inspection: 10/20/2015

Restaurant representatives - add corrected or new information about Marriott Crystal City Bell 20 (Mezzanine) And Buffet (Lobby), Banquet Kitchen And Corridor (Mezzanine), Concierge Lounge (4th Floor), VA coffee shop (lobby) »


Inspection findings

Inspection date

Type

The interior of the fryer cabinet(s) at the cook-line were observed in need of cleaning. Certified food manager information can be obtained at ORS Interactive - 6066 Leesburg Pike 200 B, Falls Church VA. High temperature dishmachine checked using a thermolabel. Chlorine dishmachine at the bar checked for proper concentration using the provided test strips.
  • Equipment Food-Contact Surfaces and Utensils/Time Temperature Control For Safety Food/Cleaning Frequency (corrected on site)
    Observation: The underneath nozzle/surface of the coffee machine at the downstairs bar was observed in need of cleaning and sanitizing.
    Correction: Except when dry cleaning methods are used as specified under section 4-603.11, surfaces of utensils and equipment contacting food that is not time/temperature control for safety food shall be cleaned: (1) At any time when contamination may have occurred
  • Handwashing Sink/Using/Operation and Maintenance (corrected on site)
    Observation: The kitchen handsink near the salad preparation station was observed slow to drain and improperly used to rinse food debris.
    Correction: The handwashing facility identified above is to be used for washing hands only.
10/20/2015Risk Factor
Provide chlorine test strips for the downstairs bar dishmachine. Floor surfaces underneath and around the kitchen equipment observed in need of cleaning. The walls along the cook-line food preparation area were observed in need of cleaning. High temperature dishmachines in the kitchen and the concierge lounge were checked using thermolabels.
  • Cooling, Cooked Food (corrected on site)
    Observation: Two bulk containers of chili in the walk-in refrigerator prepared the previous day were observed at improper temperature (53 F - 62 F). Product was discarded by the person in charge.
    Correction: Cooked time/temperature control for safety food shall be cooled: (1) Within 2 hours from 57ºC (135ºF) to 21ºC (70ºF)
  • Equipment Food-Contact Surfaces and Utensils/Time Temperature Control For Safety Food/Cleaning Frequency (corrected on site)
    Observation: The interior of the downstairs bulk ice machine chute was observed in need of cleaning and sanitizing.
    Correction: Except when dry cleaning methods are used as specified under section 4-603.11, surfaces of utensils and equipment contacting food that is not time/temperature control for safety food shall be cleaned: (1) At any time when contamination may have occurred
  • Equipment/Cooking and Baking/Cleaning Frequency
    Observation: Interior surfaces of the microwave(s) and oven units were observed in need of cleaning.
    Correction: The food-contact surfaces of cooking and baking equipment shall be cleaned at least every 24 hours. This section does not apply to hot oil cooking and filtering equipment if it is cleaned as specified in Subparagraph 4-602.11(D)(6). Food-contact surfaces of cooking equipment must be cleaned to prevent encrustations that may impede heat transfer necessary to adequately cook food. Encrusted equipment may also serve as an insect attractant when not in use. Because of the nature of the equipment, it may not be necessary to clean cooking equipment as frequently as the equipment specified in section 4-602.11.
  • Equipment/Food-Contact/Before Use After Cleaning/Sanitized (corrected on site)
    Observation: The chlorine sanitizer at the downstairs bar dishmachine was observed at improper concentration (0 ppm). Manager will clean and sanitize equipment using the upstairs kitchen high temperature machine until it has been serviced and/or repaired.
    Correction: Utensils and food-contact surfaces of equipment shall be sanitized before use after cleaning. Sanitization is accomplished after the warewashing steps of cleaning and rinsing so that utensils and food-contact surfaces are sanitized before coming in contact with food and before use.
  • Handwashing Sink/Using/Operation and Maintenance (corrected on site)
    Observation: Utensil observed improperly stored in the handsink located near the grill/stove.
    Correction: The handwashing facility identified above is to be used for washing hands only.
  • Cleaning of Plumbing Fixtures
    Observation: Handsinks along the cook-line observed in need of cleaning.
    Correction: Plumbing fixtures such as handwashing sinks, toilets, and urinals shall be cleaned as often as necessary to keep them clean and maintained and used as specified under section 5-205.11. Handwashing facilities are critical to food protection and must be maintained in operating order at all times so they will be used.
06/15/2015Risk Factor
Post 2015 Health License in public's view.
  • Eating, Drinking, or Using Tobacco/Food Contamination Prevention (corrected on site)
    Observation: Uncovered employee beverage observed stored on the shelving in the downstairs produce walk-in refrigerator.
    Correction: A food employee may drink from a closed beverage container if the container is handled to prevent contamination of: (1) The employee's hands
  • Time/Temperature Control for Safety Food, Cold Holding (corrected on site)
    Observation: Container of blue cheese crumbles and a container diced chicken observed cold holding at improper temperature in the top portion of the cook-line preparation unit (product was discarded by the person in charge).
    Correction: Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under section 3-501.19, and except as specified under paragraph (B) of this section, time/temperature control for safety food shall be maintained at 5ºC (41ºF) or less. Bacterial growth and/or toxin production can occur if time/temperature control for safety food remains in the temperature "Danger Zone" of 5ºC to 57ºC (41ºF to 135ºF) too long. Up to a point, the rate of growth increases with an increase in temperature within this zone. Beyond the upper limit of the optimal temperature range for a particular organism, the rate of growth decreases. Operations requiring heating or cooling of food should be performed as rapidly as possible to avoid the possibility of bacterial growth.
  • Equipment/Good Repair and Proper Adjustment
    Observation: The handsink soap dispenser at the cook-line entrance was observed in need of remounting to the wall.
    Correction: Equipment shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 [Materials for Construction and Repair] and 4-2 [Design and Construction]. Proper maintenance of equipment to manufacturer specifications helps ensure that it will continue to operate as designed. Failure to properly maintain equipment could lead to violations of the associated requirements of the Code that place the health of the consumer at risk. For example, refrigeration units in disrepair may no longer be capable of properly cooling or holding potentially hazardous (time/temperature control for safety) foods at safe temperatures.
  • Equipment, Food-Contact Surfaces, and Utensils (corrected on site)
    Observation: The food contact surface of the panini press was observed in need of cleaning and sanitizing.
    Correction: Equipment food-contact surfaces and utensils shall be clean to sight and touch. The objective of cleaning focuses on the need to remove organic matter from food-contact surfaces so that sanitization can occur.
  • Plumbing System/Maintained in Good Repair
    Observation: The faucet to the handsink in the "Bell 20" pantry was observed loose and in need of repair.
    Correction: A plumbing system shall be maintained in good repair. Improper repair or maintenance may result in the creation of obnoxious odors or nuisances, and may also adversely affect the operation of warewashing equipment or other equipment which depends on sufficient volume and pressure to perform its intended functions.
  • Hand Drying Provision (corrected on site) (repeated violation)
    Observation: Disposable paper towels observed not properly provided at the wait station handsink.
    Correction: Each handwashing sink or group of adjacent handwashing sinks shall be provided with: (A) Individual, disposable towels
  • Intensity/Lighting (repeated violation)
    Observation: The light intensity in the equipment/utensil storage area was observed below 20 foot candles.
    Correction: The light intensity shall be at least 215 lux (20 foot candles): (1) At a surface where food is provided for consumer self-service such as buffets and salad bars or where fresh produce or packaged foods are sold or offered for consumption, (2) Inside equipment such as reach-in and under-counter refrigerators
  • Intensity/Lighting
    Observation: Several light bulbs in the upstairs walk-in refrigerator were observed in need of replacing.
    Correction: The light intensity shall be at least 108 lux (10 foot candles) at a distance of 75 cm (30 inches) above the floor, in the walk-in refrigeration units and dry food storage areas and in other areas and rooms during periods of cleaning. Properly distributed light makes the need for cleaning apparent by making accumulations of soil conspicuous.
  • Cleaning, Frequency and Restrictions (repeated violation)
    Observation: The storage shelving above the cook-line grill/fryer area was observed in need of cleaning. Floor surface under and around cook-line observed in need of cleaning.
    Correction: Physical facilities shall be cleaned as often as necessary to keep them clean. Cleaning of the physical facilities is an important measure in ensuring the protection and sanitary preparation of food. A regular cleaning schedule should be established and followed to maintain the facility in a clean and sanitary manner.
02/18/2015Routine
High temperature dishmachine checked using a thermolabel. Ensure that the dishmachine is checked regularly using a thermolabel to make sure that it is reaching proper temperature. Follow-up conducted from previous inspection.
No violation noted during this evaluation.
11/14/2014Follow-up
A Northern VA Certified Food Manager must be on duty during all hours of operation. Transfer ServSafe Certificate at ORS Interactive 6066 Leesburg Pike 200B, Falls Church VA 22041. A recheck will be conducted on or about 11/14/2014.
  • Critical: Equipment/Food-Contact/Before Use After Cleaning/Sanitized (corrected on site)
    Observation: When tested with a thermolabel, the high temperature dishmachine was observed not achieving the proper final rinse temperature. Equipment and utensils are to be properly sanitized in the 3-compartment sink until the machine has been repaired.
    Correction: Utensils and food-contact surfaces of equipment shall be sanitized before use after cleaning. Sanitization is accomplished after the warewashing steps of cleaning and rinsing so that utensils and food-contact surfaces are sanitized before coming in contact with food and before use.
  • Critical: Food Manager Certificate and Responsibility
    Observation: There was no Nothern VA Certified Food Manager on duty during the time of follow-up inspection. The manager on duty did have an up to date ServSafe certificate.
    Correction: It shall be unlawful to operate a food establishment unless it is under the immediate control of a Northern Virginia certified food manager
11/03/2014Other
Reseal the handsink in the wait station area. The ice cream freezer was observed in need of defrosting. Repair the handsink soap dispenser at the cook-line. Correct observations. A recheck will be conducted for the high temperature dishmachine in approximately two or three weeks.
  • Critical: Time/Temperature Control for Safety Food, Hot Holding (corrected on site)
    Observation: Container of cooked potatoes (122 F) and a container of rice (118 F) were observed holding at improper temperature in the hot holding cabinet. Product was reheated to 165+ by the person in charge.
    Correction: Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under section 3-501.19, and except as specified under paragraph (B) of this section, time/temperature control for safety food shall be maintained at 57ºC (135ºF) or above, except that roasts cooked to a temperature and for a time specified in paragraph 3-401.11(B) or reheated as specified in paragraph 3-403.11(E) may be held at a temperature of 54ºC (130ºF) or above. Bacterial growth and/or toxin production can occur if time/temperature control for safety food remains in the temperature "Danger Zone" of 5ºC to 57ºC (41ºF to 135ºF) too long. Up to a point, the rate of growth increases with an increase in temperature within this zone. Beyond the upper limit of the optimal temperature range for a particular organism, the rate of growth decreases. Operations requiring heating or cooling of food should be performed as rapidly as possible to avoid the possibility of bacterial growth.
  • Equipment, Food-Contact Surfaces, and Utensils (corrected on site)
    Observation: The stone knife sharpener/case was observed in need of cleaning and sanitizing.
    Correction: Equipment food-contact surfaces and utensils shall be clean to sight and touch. The objective of cleaning focuses on the need to remove organic matter from food-contact surfaces so that sanitization can occur.
  • Equipment Food-Contact Surfaces and Utensils/Time Temperature Control For Safety Food/Cleaning Frequency (corrected on site) (repeated violation)
    Observation: Coffee/tea dispenser nozzles observed in need of cleaning and sanitizing.
    Correction: Except when dry cleaning methods are used as specified under section 4-603.11, surfaces of utensils and equipment contacting food that is not time/temperature control for safety food shall be cleaned: (1) At any time when contamination may have occurred
  • Equipment/Cooking and Baking/Cleaning Frequency
    Observation: Interior surfaces of the ovens were observed in need of cleaning.
    Correction: The cavities and door seals of microwave ovens shall be cleaned at least every 24 hours by using the manufacturer's recommended cleaning procedure. Food-contact surfaces of cooking equipment must be cleaned to prevent encrustations that may impede heat transfer necessary to adequately cook food. Encrusted equipment may also serve as an insect attractant when not in use. Because of the nature of the equipment, it may not be necessary to clean cooking equipment as frequently as the equipment specified in section 4-602.11.
  • Critical: Equipment/Food-Contact/Before Use After Cleaning/Sanitized (corrected on site)
    Observation: When tested with at thermolabel, the high temperature dishmachine was observed not achieving the proper final rinse temperature. Equipment /utensils are to be properly sanitized in the 3-compartment sink until the dishmachine has been repaired. The engineering department was contacted and were observed working on the machine during the time of inspection.
    Correction: Utensils and food-contact surfaces of equipment shall be sanitized before use after cleaning. Sanitization is accomplished after the warewashing steps of cleaning and rinsing so that utensils and food-contact surfaces are sanitized before coming in contact with food and before use.
  • Cleaning of Plumbing Fixtures (corrected on site)
    Observation: Handsink at the end of the cook-line and the handsink in the wait station area observed in need of cleaning.
    Correction: Plumbing fixtures such as handwashing sinks, toilets, and urinals shall be cleaned as often as necessary to keep them clean and maintained and used as specified under section 5-205.11. Handwashing facilities are critical to food protection and must be maintained in operating order at all times so they will be used.
10/20/2014Risk Factor
  • Critical: Hands and Arms/When to Wash (corrected on site)
    Observation: A food employee failed to wash his or her hands before donning gloves for working with food.
    Correction: Instruct food employees to clean their hands and exposed portions of their arms immediately before engaging in food preparation including working with exposed food, clean equipment and utensils, and unwrapped single-service and single-use articles (A) After touching bare human body parts other than clean, exposed portions of arms (B) After using the toilet room (C) After caring for or handling service animals or aquatic animals as specified in 2-403.11(B) (D) After coughing, sneezing, using a handkerchief or disposable tissue, using tobacco, eating, or drinking (E) After handling soiled equipment or utensils (F) During food preparation, as often as necessary to remove soil and contamination and to prevent cross contamination when changing tasks (G) When switching between working with raw food and working with ready-to-eat food (H) Before donning gloves for working with food and (I) After engaging in other activities that contaminate the hands.
  • Consumer Advisory/Consumption of Animal Foods that are Raw, Undercooked, or Not Otherwise Processed to Eliminate Pathogens (repeated violation)
    Observation: Asterisks are missing on menu items served undercooked and on the consumer advisory statement. New menus will be printed in two weeks.
    Correction: The permit holder shall inform consumers of the significantly increased risk of consuming such foods by way of a disclosure and reminder, as specified in paragraphs (B) and (C) of this section using brochures, deli case or menu advisories, label statements, table tents, placards, or other effective written means. (B) Disclosure shall include: (1) A description of the animal-derived foods, such as "oysters on the half shell (raw oysters)," "raw-egg Caesar salad," and "hamburgers (can be cooked to order);" or (2) Identification of the animal-derived foods by asterisking them to a footnote that states that the items are served raw or undercooked, or contain (or may contain) raw or undercooked ingredients. (C) Reminder shall include asterisking the animal-derived foods requiring disclosure to a footnote that states: (1) Regarding the safety of these items, written information is available upon request
  • Handwashing Sink/Using/Operation and Maintenance (corrected on site)
    Observation: The handwashing station at the bar is being used as a dump station.
    Correction: The handwashing facility identified above is to be used for washing hands only.
  • Critical: Food Manager Certificate and Responsibility (corrected on site)
    Observation: The food establishment is not under the immediate control of a Northern Virginia certified food manager. A manager arrived during the inspection.
    Correction: It shall be unlawful to operate a food establishment unless it is under the immediate control of a Northern Virginia certified food manager
06/27/2014Risk Factor
  • Critical: Hands and Arms/When to Wash (corrected on site)
    Observation: A food employee failed to wash his or her hands before working with clean equipment and utensils after handling soiled equipment or utensils. Corrected by instruction.
    Correction: Instruct food employees to clean their hands and exposed portions of their arms immediately before engaging in food preparation including working with exposed food, clean equipment and utensils, and unwrapped single-service and single-use articles (A) After touching bare human body parts other than clean, exposed portions of arms (B) After using the toilet room (C) After caring for or handling service animals or aquatic animals as specified in 2-403.11(B) (D) After coughing, sneezing, using a handkerchief or disposable tissue, using tobacco, eating, or drinking (E) After handling soiled equipment or utensils (F) During food preparation, as often as necessary to remove soil and contamination and to prevent cross contamination when changing tasks (G) When switching between working with raw food and working with ready-to-eat food (H) Before donning gloves for working with food and (I) After engaging in other activities that contaminate the hands.
  • Consumer Advisory/Consumption of Animal Foods that are Raw, Undercooked, or Not Otherwise Processed to Eliminate Pathogens
    Observation: The food establishment serves or sells raw or undercooked food and the permit holder does not inform consumers of the significantly increased risk consuming such foods by way of a disclosure and reminder using brochures, deli case or menu advisories, label statements, table tents, placards, or other effective written means. There is no asterisk next to the food or the disclosure directing the consumer to the advisory.
    Correction: The permit holder shall inform consumers of the significantly increased risk of consuming such foods by way of a disclosure and reminder, as specified in paragraphs (B) and (C) of this section using brochures, deli case or menu advisories, label statements, table tents, placards, or other effective written means. (B) Disclosure shall include: (1) A description of the animal-derived foods, such as "oysters on the half shell (raw oysters)," "raw-egg Caesar salad," and "hamburgers (can be cooked to order);" or (2) Identification of the animal-derived foods by asterisking them to a footnote that states that the items are served raw or undercooked, or contain (or may contain) raw or undercooked ingredients. (C) Reminder shall include asterisking the animal-derived foods requiring disclosure to a footnote that states: (1) Regarding the safety of these items, written information is available upon request
  • Sanitizing Solutions, Testing Devices (corrected on site)
    Observation: A test kit or other device that accurately measures the concentration of the sanitizing solution is not provided (coffee bar dishmachine). Manager was given test strips by inspector.
    Correction: A test kit or other device that accurately measures the concentration in mg/L of sanitizing solutions shall be provided. Testing devices to measure the concentration of sanitizing solutions are required for 2 reasons: 1. The use of chemical sanitizers requires minimum concentrations of the sanitizer during the final rinse step to ensure sanitization
  • Cutting Surfaces
    Observation: The surfaces of the cutting boards are no longer effectively cleaned and sanitized.
    Correction: Surfaces such as cutting blocks and boards that are subject to scratching and scoring shall be resurfaced if they can no longer be effectively cleaned and sanitized, or discarded if they are not capable of being resurfaced. Cutting surfaces such as cutting boards and blocks that become scratched and scored may be difficult to clean and sanitize. As a result, pathogenic microorganisms transmissible through food may build up or accumulate. These microorganisms may be transferred to foods that are prepared on such surfaces.
  • Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils/Clean
    Observation: The nonfood-contact surfaces of the following equipment is not kept free of an accumulation of dust, dirt, food residue, and/or other debris:
    -Stainless steel cabinetry in the kitchen
    -Shelving in the walk-in cooler
    -Cabinetry at the omelet station
    -Inside reach-in refrigeration units
    -Speed racks used to store food in the Victory refrigerator
    -Rolling rack used to store spices.

    Correction: Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris. The objective of cleaning focuses on the need to remove soil from nonfood contact surfaces so that pathogenic microorganisms will not be allowed to accumulate and insects and rodents will not be attracted.
  • Equipment, Food-Contact Surfaces, and Utensils (corrected on site)
    Observation: The slicer and the large steam/brasier unit are not clean to sight and touch. Observed dishes and utensils stored as "clean" were not clean to site and touch.
    Correction: Equipment food-contact surfaces and utensils shall be clean to sight and touch. The objective of cleaning focuses on the need to remove organic matter from food-contact surfaces so that sanitization can occur.
  • Equipment Food-Contact Surfaces and Utensils/Time Temperature Control For Safety Food/Cleaning Frequency
    Observation: Surfaces of the soda guns at the bar are not clean. The Cambros ice storage unit is in need of cleaning (concierge lounge).
    Correction: Except when dry cleaning methods are used as specified under section 4-603.11, surfaces of utensils and equipment contacting food that is not time/temperature control for safety food shall be cleaned: (1) At any time when contamination may have occurred
  • Equipment, Utensils, Linens, and Single-Service and Single-Use Articles/Storing
    Observation: Observed cleaned equipment and utensils improperly stored in dirty plastic bins.
    Correction: Cleaned equipment and utensils, laundered linens, and single-service and single-use articles shall be stored: (1) In a clean, dry location
  • Intensity/Lighting
    Observation: The light intensity is below 20 foot candles in the equipment and utensil storage area.
    Correction: The light intensity shall be at least 215 lux (20 foot candles): (1) At a surface where food is provided for consumer self-service such as buffets and salad bars or where fresh produce or packaged foods are sold or offered for consumption, (2) Inside equipment such as reach-in and under-counter refrigerators
  • Physical Facilities/Repairing
    Observation: Observed floor and wall tiles damaged.
    Correction: Physical facilities shall be maintained in good repair. Poor repair and maintenance compromises the functionality of the physical facilities. This requirement is intended to ensure that the physical facilities are properly maintained in order serve their intended purpose.
  • Cleaning, Frequency and Restrictions
    Observation: The floors and walls throughout food service areas are not cleaned as often as necessary to keep them clean.
    Correction: Physical facilities shall be cleaned as often as necessary to keep them clean. Cleaning of the physical facilities is an important measure in ensuring the protection and sanitary preparation of food. A regular cleaning schedule should be established and followed to maintain the facility in a clean and sanitary manner.
  • Critical: Sanitizers, Criteria/Chemicals for Food Contact Surfaces (repeated violation)
    Observation: The chlorine sanitizer applied to food-contact surfaces does not meet requirements in the bar dishmachine (sanitizer too high).
    Correction: Chemical sanitizers and other chemical antimicrobials applied to food-contact surfaces shall meet the requirements specified in 40 CFR 180.940 Tolerance exemptions for active and inert ingredients for use in antimicrobial formulations (food-contact surface sanitizing solutions). Chemical sanitizers are included with poisonous or toxic materials because they may be toxic if not used in accordance with requirements listed in the Code of Federal Regulations (CFR). Large concentrations of sanitizer in excess of the CFR requirements can be harmful because residues of the materials remain. The CFR reference that is provided lists concentrations of sanitizers that are considered safe.
02/24/2014Routine
  • Critical: Potentially Hazardous Food, Cold Holding (corrected on site) (repeated violation)
    Observation: Blue cheese at 50 F, removed. Sliced tomatoes at 51 F, removed
    Correction: Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under section 3-501.19, and except as specified under paragraph (B) of this section, Potentially Hazardous Food (Time/Temperature Control for Safety Food) shall be maintained at 5ºC (41ºF) or less. Bacterial growth and/or toxin production can occur if potentially hazardous food (time/temperature control for safety food) remains in the temperature "Danger Zone" of 5ºC to 57ºC (41ºF to 135ºF) too long. Up to a point, the rate of growth increases with an increase in temperature within this zone. Beyond the upper limit of the optimal temperature range for a particular organism, the rate of growth decreases. Operations requiring heating or cooling of food should be performed as rapidly as possible to avoid the possibility of bacterial growth.
  • Critical: Equipment, Food-Contact Surfaces, and Utensils (Critical) (repeated violation)
    Observation: All the cutting boards need cleaning.
    Correction: Equipment food-contact surfaces and utensils shall be clean to sight and touch. The objective of cleaning focuses on the need to remove organic matter from food-contact surfaces so that sanitization can occur.
10/28/2013Risk Factor
  • Critical: Packaged and Unpackaged Food-Separation, Packaging, and Segregation/Preventing Food and Ingredient Contamination (corrected on site)
    Observation: Raw eggs store next to ready to eat food.(buffet kitchen)
    Correction: Food shall be protected from cross contamination by separating raw animal foods during storage, preparation, holding, and display from: (a) Raw ready-to-eat food including other raw animal food such as fish for sushi or molluscan shellfish, or other raw ready-to-eat food such as fruits and vegetables, and (b) Cooked ready-to-eat food.
  • Critical: Potentially Hazardous Food, Cold Holding (corrected on site) (repeated violation)
    Observation: Cut melons at 45 F (removed) (main kitchen).
    Correction: Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under section 3-501.19, and except as specified under paragraph (B) of this section, Potentially Hazardous Food (Time/Temperature Control for Safety Food) shall be maintained at 5ºC (41ºF) or less. Bacterial growth and/or toxin production can occur if potentially hazardous food (time/temperature control for safety food) remains in the temperature "Danger Zone" of 5ºC to 57ºC (41ºF to 135ºF) too long. Up to a point, the rate of growth increases with an increase in temperature within this zone. Beyond the upper limit of the optimal temperature range for a particular organism, the rate of growth decreases. Operations requiring heating or cooling of food should be performed as rapidly as possible to avoid the possibility of bacterial growth.
  • Critical: Sanitizers, Criteria/Chemicals for Food Contact Surfaces (corrected on site)
    Observation: Chlorine sanitizer in the small dishwashing machine was more than 400 ppm. (coffee shop).
    Correction: Chemical sanitizers and other chemical antimicrobials applied to food-contact surfaces shall meet the requirements specified in 40 CFR 180.940 Tolerance exemptions for active and inert ingredients for use in antimicrobial formulations (food-contact surface sanitizing solutions). Chemical sanitizers are included with poisonous or toxic materials because they may be toxic if not used in accordance with requirements listed in the Code of Federal Regulations (CFR). Large concentrations of sanitizer in excess of the CFR requirements can be harmful because residues of the materials remain. The CFR reference that is provided lists concentrations of sanitizers that are considered safe.
06/12/2013Risk Factor
Concierge lounge has been relocated to mezzanine level.
2013 Health Permit not posted.

  • Critical: Potentially Hazardous Food, Cold Holding (corrected on site)
    Observation: Milk in Continental 2 door reach in holding at 50oF in Concierge Lounge. PHF items relocated to fully functional unit.
    Correction: Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under section 3-501.19, and except as specified under paragraph (B) of this section, Potentially Hazardous Food (Time/Temperature Control for Safety Food) shall be maintained at 5ºC (41ºF) or less. Bacterial growth and/or toxin production can occur if potentially hazardous food (time/temperature control for safety food) remains in the temperature "Danger Zone" of 5ºC to 57ºC (41ºF to 135ºF) too long. Up to a point, the rate of growth increases with an increase in temperature within this zone. Beyond the upper limit of the optimal temperature range for a particular organism, the rate of growth decreases. Operations requiring heating or cooling of food should be performed as rapidly as possible to avoid the possibility of bacterial growth.
  • Critical: Consumer Advisory/Consumption of Animal Foods that are Raw, Undercooked, or Not Otherwise Processed to Eliminate Pathogens (repeated violation)
    Observation: The food establishment serves or sells raw or undercooked food and the permit holder does not inform consumers of the significantly increased risk consuming such foods by way of a disclosure and reminder using brochures, deli case or menu advisories, label statements, table tents, placards, or other effective written means. Reminder asterisks not associated with consumer advisory notice on "anytime menu".
    Correction: The permit holder shall inform consumers of the significantly increased risk of consuming such foods by way of a disclosure and reminder, as specified in paragraphs (B) and (C) of this section using brochures, deli case or menu advisories, label statements, table tents, placards, or other effective written means. (B) Disclosure shall include: (1) A description of the animal-derived foods, such as "oysters on the half shell (raw oysters)," "raw-egg Caesar salad," and "hamburgers (can be cooked to order);" or (2) Identification of the animal-derived foods by asterisking them to a footnote that states that the items are served raw or undercooked, or contain (or may contain) raw or undercooked ingredients. (C) Reminder shall include asterisking the animal-derived foods requiring disclosure to a footnote that states: (1) Regarding the safety of these items, written information is available upon request
  • Temperature Measuring Devices, Ambient Air and Water (corrected on site)
    Observation: The ambient air or water temperature measuring device in the line prep unit is broken.
    Correction: Ambient air and water temperature measuring devices that are scaled only in Fahrenheit shall be accurate to +/- 3ºF in the intended range of use. A temperature measuring device used to measure the air temperature in a refrigeration unit is not required to be as accurate as a food thermometer because the unit's temperature fluctuates with repeated opening and closing of the door and because accuracy in measuring internal food temperatures is of more significance. If Fahrenheit thermometers are used, the 3ºF requirement applies because of the calibrated intervals of Fahrenheit thermometers.
  • Equipment/Fixed, Spacing or Sealing
    Observation: The hand sink in the men's employee restroom is no longer sealed to the wall.
    Correction: Counter-mounted equipment that is not easily movable shall be installed to allow cleaning of the equipment and areas underneath and around the equipment by being: (1) Sealed
  • Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils/Clean
    Observation: The nonfood-contact surface of the interior of some cabinetry in banquet kitchen is not kept free of an accumulation of dust, dirt, food residue, and/or other debris.
    Correction: Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris. The objective of cleaning focuses on the need to remove soil from nonfood contact surfaces so that pathogenic microorganisms will not be allowed to accumulate and insects and rodents will not be attracted.
  • Critical: Equipment, Food-Contact Surfaces, and Utensils (Critical) (corrected on site)
    Observation: The food-contact surface of the panini press is not clean to sight and touch.
    Correction: Equipment food-contact surfaces and utensils shall be clean to sight and touch. The objective of cleaning focuses on the need to remove organic matter from food-contact surfaces so that sanitization can occur.
  • Critical: Sanitized/Hot Water and Chemical/Methods (repeated violation)
    Observation: After being cleaned, equipment food-contact surfaces and utensils are not sanitized in a chemical manual or mechanical operations, using a proper solution. Bar glass washer observed not dispensing sanitizer.
    Correction: After being cleaned, equipment food-contact surfaces and utensils shall be sanitized in chemical manual or mechanical operations, including the application of sanitizing chemicals by immersion, manual swabbing, brushing, or pressure spraying methods, using a solution as specified under section 4-501.114 by providing: (1) An exposure time of at least 10 seconds for a chlorine solution specified under paragraph 4-501.114(A), (2) An exposure time of at least 7 seconds for a chlorine solution of 50 mg/L that has a pH of 10 or less and a temperature of at least 38°C (100°F) or a pH of 8 or less and a temperature of at least 24°C (75°F), (3) An exposure time of at least 30 seconds for other chemical sanitizing solutions, or (4) An exposure time used in relationship with a combination of temperature, concentration, and pH that, when evaluated for efficacy, yields sanitization as defined in Subparagraph 1-201.10(B). Efficacious sanitization depends on warewashing being conducted within certain parameters. Time is a parameter applicable to both chemical and hot water sanitization. The time hot water or chemicals contact utensils or food-contact surfaces must be sufficient to destroy pathogens that may remain on surfaces after cleaning. Other parameters, such as rinse pressure, temperature, and chemical concentration are used in combination with time to achieve sanitization.
  • Critical: Sanitized/Hot Water and Chemical/Methods (repeated violation)
    Observation: After being cleaned, equipment food-contact surfaces and utensils are not sanitized in the hot water mechanical operations by being cycled through equipment that is properly set up and/or achieving a utensil surface temperature of 160°F as measured by an irreversible registering temperature indicator.
    Correction: After being cleaned, equipment food-contact surfaces and utensils shall be sanitized in hot water mechanical operations by being cycled through equipment that is set up as specified under sections 4-501.15, 4-501.112, and 4-501.113 and achieving a utensil surface temperature of 71°C (160°F) as measured by an irreversible registering temperature indicator. When surface temperatures of utensils passing through warewashing machines using hot water for sanitizing do not reach the required 71°C (160°F), it is important to understand the factors affecting the decreased surface temperature. A comparison should be made between the machine manufacturer's operating instructions and the machine's actual wash and rinse temperatures and final rinse pressure. The actual temperatures and rinse pressure should be consistent with the machine manufacturer's operating instructions and within limits specified in sections 4-501.112 and 4-501.113. If either the temperature of pressure of the final rinse spray is higher than the specified upper limit, spray droplets may disperse and begin to vaporize resulting in less heat delivery to utensil surfaces. Temperatures below the specified limit will not convey the needed heat to surfaces. Pressures below the specified limit will result in incomplete coverage of the heat-conveying sanitizing rinse across utensil surfaces.
  • Equipment, Utensils, Linens, and Single-Service and Single-Use Articles/Storing
    Observation: Stack of dishracks stored on floor by dumb waiter.
    Correction: Cleaned equipment and utensils, laundered linens, and single-service and single-use articles shall be stored: (1) In a clean, dry location
  • Handwashing Sink/Using/Operation and Maintenance (corrected on site)
    Observation: The handwashing station at the far end of the cook line is being used to clean equipment and utensils.
    Correction: The handwashing facility identified above is to be used for washing hands only.
  • Refuse/Areas, Enclosures, and Receptacles, Good Repair
    Observation: Lid is broken on compost container on loading dock, and container is unable to be closed.
    Correction: Storage areas, enclosures, and receptacles for refuse, recyclables, and returnables shall be maintained in good repair. Storage areas for garbage and refuse containers must be constructed so that they can be thoroughly cleaned in order to avoid creating an attractant or harborage for insects or rodents. In addition, such storage areas must be large enough to accommodate all the containers necessitated by the operation in order to prevent scattering of the garbage and refuse.
  • Hand Drying Provision
    Observation: Each handwashing sink is not provided with individual, disposable towels
    Correction: a continuous towel system that supplies the user with a clean towel
  • Handwashing Signage
    Observation: A sign or poster that notifies food employees to wash their hands is not provided at all handwashing lavatories used by food employees and/or is not clearly visible to food employees. No hand wash sign available at the concierge lounge hand wash station.
    Correction: A sign or poster that notifies food employees to wash their hands shall be provided at all handwashing sinks used by food employees and shall be clearly visible to food employees. A sign or poster is required to remind food employees to wash their hands.
  • Cleaning, Frequency and Restrictions
    Observation: The area under equipment at main bar are not cleaned as often as necessary to keep them clean.
    Correction: Physical facilities shall be cleaned as often as necessary to keep them clean. Cleaning of the physical facilities is an important measure in ensuring the protection and sanitary preparation of food. A regular cleaning schedule should be established and followed to maintain the facility in a clean and sanitary manner.
01/31/2013Routine

Do you have any questions you'd like to ask about Marriott Crystal City Bell 20 (mezzanine) and buffet (lobby)? Post them here so others can see them and respond.

×
Marriott Crystal City Bell 20 (mezzanine) and buffet (lobby) respresentatives - respond and add information

Write your review!

Your Ratings

You can rate this restaurant in different categories from 1 star (worst) to 5 stars (best) or leave category unrated

Food:
Service:
Price:
Ambience:
Cleanliness:

Your Review


Would you recommend Marriott Crystal City Bell 20 (mezzanine) and buffet (lobby) to others? (optional)
  
Add photo of Marriott Crystal City Bell 20 (mezzanine) and buffet (lobby) (optional)
Add more info about the restaurant »

About You

Your nickname:

Optional Verification

(additional info to increase the weight and the placement of your review and ratings)

Real Name:
Email (won't be published):
Date and time of your visit to this restaurant:
Phone number (won't be published):
Leave your signature»

Recently added reviews

Name City Users' Rating
Burger King #1602 (01-1464)Virginia Beach, VA
*
Hardee's #2341Roanoke, VA
****
McDonald's #3984 (01-0368)Virginia Beach, VA
*
Pupuseria GaviotaHarrisonburg, VA
*****
McDonald's #11683Midlothian, VA
**•
Jim's Country StoreFront Royal, VA
*
Hardee'sGalax, VA
*
McDonald'sMax Meadows, VA
Popeyes # 5738Chesapeake, VA
*
Mister Softee of Hampton RoadsNorfolk, VA

Create your own business profile on city-data.com. It's completely free!
Business Search - 14 Million verified businesses
Search for:  near: