No violation noted during this evaluation. | 12/23/2015 | Routine |
- Critical: Before Use After Cleaning - Utensils and food-contact surfaces of equipment shall be sanitized before use after cleaning. (corrected on site)
|
12/03/2014 | Routine |
No violation noted during this evaluation. | 11/14/2013 | VCR |
- Temperature Measuring Devices - (A) In a mechanically refrigerated or hot food storage unit, the sensor of a temperature measuring device shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot food storage unit. (B) Except as specified in (C) of this section, cold or hot holding equipment used for potentially hazardous food shall be designed to include and shall be equipped with at least one integral or permanently affixed temperature measuring device that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to equipment for which the placement of a temperature measuring device is not a practical means for measuring the ambient air surrounding the food because of the design, type, and use of the equipment, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated food transport containers, and salad bars. (D) Temperature measuring devices shall be designed to be easily readable. (E) Food temperature measuring device and water temperature measuring device on warewashing machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1C or 2F in the intended range of use.
|
11/04/2013 | Routine |
No violation noted during this evaluation. | 12/06/2012 | Routine |
No violation noted during this evaluation. | 01/04/2012 | Enforcement |
- Food Labels - Food packaged in the food facility labeled as specified in law; Consumer warnings as required by law on labels.
- Handwashing Cleanser, Availability - Each handwashing lavatory or group of 2 adjacent lavatories shall be provided with a supply of hand cleaning liquid, powder, or bar soap.
- Hand Drying Provision - Each handwashing lavatory or group of adjacent lavatories shall be provided with Individual, disposable towels; a continuous towel system that supplies the user with a clean towel; or a heated-air hand drying device.
- Temperature Measuring Devices - (A) In a mechanically refrigerated or hot food storage unit, the sensor of a temperature measuring device shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot food storage unit. (B) Except as specified in (C) of this section, cold or hot holding equipment used for potentially hazardous food shall be designed to include and shall be equipped with at least one integral or permanently affixed temperature measuring device that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to equipment for which the placement of a temperature measuring device is not a practical means for measuring the ambient air surrounding the food because of the design, type, and use of the equipment, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated food transport containers, and salad bars. (D) Temperature measuring devices shall be designed to be easily readable. (E) Food temperature measuring device and water temperature measuring device on warewashing machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1C or 2F in the intended range of use.
|
12/23/2011 | Routine |
- Critical: Demonstration - The Person in Charge shall demonstrate to the Regulatory Authority knowledge of food borne disease prevention, application of the HACCP principles, and the requirements of the Idaho Food Code (IFC). The Person in Charge shall demonstrate this knowledge by at least One of the following: A. Complying with IFC by not having any critical violations at the time of inspection. B. Being a certified food protection manager who has shown proficiency of required information through passing a test that is part of an Accredited Program. The approved programs in Idaho are: Certified Professional Food Manager (CPFM), National Registry of Food Service Professionals (NRFSP), ServSafe, Idaho online course, and the University of Idaho Extension course. C. Responding correctly to the inspector’s questions as they relate to the specific food operation.
- Hand Drying Provision - Each handwashing lavatory or group of adjacent lavatories shall be provided with Individual, disposable towels; a continuous towel system that supplies the user with a clean towel; or a heated-air hand drying device.
- Equipment, Utensils, Linens, and Single-Service and Single-Use Articles - Cleaned equipment and utensils, laundered linens, and single-service and single-use articles shall be stored 6'' off the floor in a clean, dry location & not stored in prohibited areas in compliance to Food Code. (corrected on site)
|
12/10/2010 | Routine |
Restaurant representatives - add corrected or new information about Video Mexico Of Twin Falls Llc, 1960 Kimberly Rd, Twin Falls, ID 83301 »